Offline PCB Router is an efficient and high-precision PCB separator, which can depanel the whole PCB board into small pieces according to demand, improve production efficiency and product quality. Below we will introduce the steps of the automatic PCB Router machine in detail.

First of all, the whole PCB to be divided is placed on the work table of the separator machine. The workbench is usually equipped with customized fixtures or universal fixtures for accurate fixing of the PCB.

Next, according to the size and partition requirements of the PCB, it is set on the control interface of the separator. You can usually set parameters such as the length and width of the cutting path as well as the depth and speed parameter.

Then, start the separator, and the machine will automatically move the spindle to the set starting position to start the separator operation. The separator machine uses a high-speed rotating router bit to cut the PCB board into small pieces by milling.

In the process of depaneling the PCB, the separator machine will automatically move the router to cut according to the pre-set path. The Separator is usually equipped with a high-precision guide rail and servo drive system, which can achieve accurate positioning and cutting.

The path of the separator machine can be a straight line, a curve or a complex outline, which can be set according to different needs. At the same time, the separator usually has a tool intelligent compensation function, which can automatically adjust according to the degree of tool wear to ensure the accuracy and quality of cutting.

The machine will produce some noise and chips during the cutting process, in order to protect the operator and reduce environmental pollution, will be equipped with dust collector devices and noise enclosures.

Finally, when the depaneling operation is completed, the separator machine will automatically stop working, and the small cut PCB board will be discharged. The operator can remove the PCBs for the next step of process processing.

In summary, the offline PCB separator mainly operation include: placing the PCB board, setting the segmentation parameters, starting the separator,depaneling the PCB, automatically vacuuming the dust and removing the PCBs . These steps are designed to increase board efficiency, ensure board accuracy and improve production quality, making the PCB manufacturing process more efficient and reliable.

Consulting phone: 139 2926 8485 (Please feel free to contact us for the depaneling solution, recommend the appropriate separator) This article by Genitec finishing original, reproduced must indicate the source: www.genitec.tw