ZM500 Automatic Stencil Inspection Machine

  • Automatic inspection of area, position, foreign matter, hole completeness, tension.

  • High accuracy and large inspection area.

  • Import GERBER data, modular data structure, 2-3 minutes to results,

  • Obtain the error range by measuring the stencil opening size, position and other parameters, and compare it with the reference value to see if it is qualified.

  • Inspection of hole defects such as hole deviation, hole accuracy, shape, more holes, missing holes, area error, edge burrs, etc.

Contact us today! Start Smart Manufacturing.

ModelZM500
InspectionAperture area, position, offset, size, foreign matter, burr, blocked hole, missing holes, tention
Measure time3.5min( 130*100mm, data:25122 holes)
Measurement accuracy of opening areaGage R&R<5.0% (Actual measurement is GR&R<1-2% or less)
Aperture measurement accuracy±10μm
Accuracy of motion systemRepeatability ±4μm servo system (resolution: 0.5μm)
Tension detection±0.1N.cm, tension range 0-50N.cm
Offline programming
Possible
Data trace abilityAutomatically inspection data saving
ResolutionDefault 6.6μm, can be customized
FOV25*18mm (optional)
MotorLinear motor
PlatformGranite table
Scan range550*550mm
Frame size736*736mm
Reports generationAutomatically generate inspection reports
Gas supply0.4-0.6MPa
Power requirement220V  50/60Hz  2000W
Dimension(W*D*H)1327*1266*1500mm
Weight1000kg
Copyright © 2024 seprays.com. All Rights Reserved.