ZM30-LT In-Line Multi-Knife PCBA Depaneler

ZM30-LT In-Line Multi-Knife PCBA Depaneler - 이미지 2

ZM30-LT In-Line Multi-Knife PCBA Depaneler - 이미지 3

ZM30-LT-라인 멀티-칼 PCBA Depaneler

제품 특징:

–전체 자동화:완전 자동화에서 먹이는 절단 및 출력을 줄이고,수작업 및 생산 효율을 향상.

– Precision positioning technology: ensure cutting precision, avoid damaging PCBA, and improve product quality.

–유연한 재료 처리:를 사용하여 흡입 컵과 벨트 전송에 적응하는 다양한 크기와 모양의 PCBA.

– Integrated waste management: instantly dispose of cutting waste, keep the working environment tidy, and optimize the production process.

– Continuous cycle operations support uninterrupted operation, suitable for mass production needs.

카테고리: PCB V-그루브 절단기 태그: ZM30-LT depaneler

설명

모델	ZM30-LT
장비 크기	L:1250MM、W:500MM、H:1200MM
장비의 전압	220V
전원	3000w/H
최대 길이드	300MM(더 이상 크기의 없이 제품에 보조로 재료를 밀어)
최대 폭	250MM(주문을 받아서 만들어 질 수있다 widera)
블레이드 크기	3x40x80
두께 용	0.5–2.5MM
속도	조절
조정가능한 범위의 칼축	5MM(아래 조정 가능)
지원 사용자 지정	에 따라 사용자 정의 할 수 있습니다 매개변수 및 요구 사항은 고객이 제공하는

Product Introduction

Online fully automatic panel splitter, effective cutting size: 150mm-300mm

Panel splitter equipment: The spacing between each split product must be greater than 8mm.

A fully automatic panel splitter is suitable for equidistant and non-equidistant product splitting.g

The machine can be changed according to the width of the product and the spacing between each split. It

Users can select the electrical control part through the human-machine interface, making it convenient to open or shield.

Engineers equip the equipment with a human-machine interface and protect it with a closed or acrylic cover to ensure safety and prevent damage.

Operators need to place the floor-standing structure in a specific work area for it to participate in the operation.

The design uses a square welded frame, and technicians apply powder coating and paint to the surface of the sheet metal sealing plate.

Engineers rust-proof the mechanical structure through electroplating or anode sandblasting, and they manufacture all components using 45# steel plate, A3 steel plate, or national standard aluminum surfaces.

Application Cases

The ZM30-LT depaneler is an advanced, fully automated solution designed to streamline the depaneling process from start to finish. From automatic feeding to precise cutting and smooth discharging, this intelligent system minimizes manual handling while boosting production efficiency and consistency.

Equipped with precision positioning technology, the ZM30-LT depaneler ensures accurate cuts without damaging delicate PCBAs, safeguarding product quality throughout the operation. Its flexible material handling system—featuring suction cups and belt conveyors—easily adapts to varying sizes and shapes of circuit boards.

An integrated waste management system instantly collects cutting debris, keeping the work area clean and optimizing production flow. Designed for continuous cycle operation, this depaneler is the ideal solution for high-volume, uninterrupted manufacturing environments.